1/2/5pcs Laboratory Specific Copper Clamp for Stainless Steel Rod or PTFE Stirrer Rod JJ-1 Electrical Mixing Equipment Accessories
Specification:
Material: Copper
Type: Copper chuck
Instruction:
Measure the diameter of the motor shaft before selecting the necessary copper chuck:
1. If the output shaft of the motor is 8 mm, then a copper clamp 8 mm thick is chosen.
2. If the output shaft of the motor is 10 mm, the copper tension head of the upper 10 mm is selected.
3. If necessary, a copper clamp with a stirring rod is needed, then the 7 mm copper clamp at the bottom will be required.
For a conventional electric laboratory stirrer with a motor power of less than 120 W (inclusive) choose: 8 mm top copper chuck, for a motor power greater than 160 W (inclusive) choose: 10 mm top copper chuck.