Pulse Generators
Engraving machine handwheel controller LHB04B-4 LHB04B-6 for system
Reliable quality.Low energy design
The average service life of WHB04-L handle with 2 AA batteries is about 4 months. When the handle button is working, if there is no button, it will automatically enter the power saving mode after 1 second. There will be no power consumption when the user forgets to turn off the power switch. , The service life of 2 AA batteries can about 4 months.
handwheel 4-axis USB handwheel Pulse 50PPR optical encoder generator MPG pendant
-Work for
-Support 4 axes. The 4th axis-A axis, no A=0 function (A axis function is not as much as other 3 axes)
-All buttons are programmable
-Regarding the handwheel, if you move slowly, the machine runs slowly; you move fast, and the machine runs fast.
-Large-screen rich real-time display:
-Display machine status, running, pause, idle, step value
-Display X y Z axis table coordinates and xyz axis machine coordinates
-Display feedrate, speed
operate:
-Switch X axis coordinate adjustment
-Switch y
-axis coordinate adjustment
-Switch z-axis coordinate adjustment
-Switching handwheel guide -Feed adjustment switch
-Speed control switch
Encoder:100 PPR
USB cable:5 meters
Keys:16 (support 10 custom keys)
Maximum number of shaft : 6 axis
Display:Dot matrix backlit display
Material:ABS and PC materials have good crash resistance, heat resistance and toughness
1. Using frequency hopping transmission, strong anti-interference ability, using 433MHZ, ISM wireless FR transmission technology, transmitting power 10DB, receiving sensitivity -98DB. There are 32 frequency hopping channels with an interval of 1MHZ for each channel. Data encryption transmission, automatic frequency hopping, automatic ID code learning. Frequency hopping transmission technology, the same room can support 32 devices at the same time without affecting each other. 2. Axis selection/speed with switch control The axis selection with switch realizes the closing of the electronic handwheel and the corresponding XYZABC function selection control. The magnification selection has switch step selection. 3. The performance is stable and reliable. The alloy encoder is adopted, the tooth position is clear, and the positioning is accurate. ABS and PC material, good tear resistance and heat resistance. 4. display adopts dot matrix backlight display frequency to grasp the current working status in real time.
installation:
1. After is installed, a folder named "PlugIns" will be created in the folder. This folder is where you want the plug-in files to be known to . Place "ShuttlePro.dll" in the \\PlugIns folder. Check to make sure it is there.
2. Setup diver for automatic tool height setting function M930.m1s Copy the installation directory to MACH
3..\\macros\Mach3Mill 3. Now the ShuttlePro.dll file is in \\PlugIns, the next step is to connect to hubtlePro. If you are sure that your ShuttlePro is running and your hardware is running, then you only need to ShuttlePro into one of the USB ports.
4. After connecting ShuttlePro, start and go to the "Configuration" menu option and select "Configure Plugin". You should see a green check mark in front of the ShuttlePro option. If it is not checked, you can check it. The check mark indicates that found ShuttlePro on tartup. Click the yellow "CONFIG" and set the buttons as needed.
5. After selecting the correct button in the CONFIG menu of the ShuttlePro plug-in, the Shuttle device should work normally.