Bearing
108AT RU28 UUCC0P5 XRU1008 UUCC0P5 cross roller bearing (10mm * 52mm * 8mm) precision slewing bearing, robot joint bearing
Model: RU28 UU CC0 P5 / Equivalent to CRBF108ATUU T1 P5

Inner ring (d): 10mm

Outer ring (D): 52mm

Width (B): 8mm

Weight: 0.12kg

Structure: crossed roller bearing, with mounting holes on inner and outer ring
Sealing: open type with no seals.
Mounting hole of inner ring:
PCD1: 16mm (4--M3 through)
Mounting hole of outer ring:
PCD2: 42mm (6-3.4 drilled through,
6.5 counter bore depth 3.3)
Materials: Bearing steel (GCr15/52100/SUJ2)
Precision grade: P5 (P4 available upon request)
Lubrication type: Grease lubrication
Lubrication hole: Yes
Load direction: axial, radial and tilting moment
Structure of crossed cylindrical roller bearing:
Cross roller bearing is a special type of bearing with split Inner Ring and rotating outer ring. Because the split inner or Outer Ring is fixed to the cross roller shaft ring after the roller and spacer holder are installed, to prevent separation, the installation of the cross roller shaft ring is simple. Because the rollers are arranged crosswise, only one set of crosswise roller shaft ring can bear the load in all directions, and the rigidity is 3 ~ 4 times higher than the traditional model. At the same time, because the inner ring or outer ring of the crossed roller bearing is two-divided structure, the bearing clearance can be adjusted, even if it is preloaded, it can also achieve high-precision rotary motion. Moreover, because of its special structure, it is usually used as a joint bearing in industrial robots.