Dosing Pumps
Specification:
The 12V peristaltic self-priming pump, with a power of about 8W
The peristaltic pump supports the positive and negative change of water flow direction. The pressure test is good.
In addition, the nozzle can be used for spray. The pump material is very good.
The planetary reducer 3 roller peristaltic pump head and roller holder are metal supports.
The pump pipe is imported long-life rubber hose, and the tail is equipped with a photoelectric encoder.
It is a very good small volume peristaltic pump
The red heat shrink tubing sleeve on the outer side of the encoder is the transmitting tube,
with a red thin wire positive pole and a black thin wire negative pole. The emission current limit is controlled within 10ma.
The black heat shrink tubing sleeve near the inside is the receiving tube, with a red thin wire positive pole and a black thin wire negative pole.
This water pump has a nominal DC voltage of 12V and a power of approximately 8W.
It can operate with a measured voltage of 5-12V, and the voltage determines the flow rate.
When using 5V low voltage, a one may not be able to run smoothly.
As long as the high voltage of 12V runs smoothly, the working voltage can be reduced.
The measured flow rate of the water pump is 5V with no load current of 0.45A, flow rate of 90ml/min,
12V with no load current of 0.6A, flow rate of 290ml/min.
The motor can also be controlled by a DC PWM brush motor speed controller to change the flow rate.
For higher precision control, the motor encoder feedback can be used to achieve high-precision quantitative output,
which requires personal research. The water pump weighs about 103 grams.
Package List:
Mini Pump x 1PCS
Application : Metering
Structure : Peristaltic Pump
Model Number : 8W
Pressure : Low Pressure
Fuel : Electric
Power (W) : Electric
Use : Peristaltic Pump
Rated voltage : DC 12V
Suitable voltage : DC 5V-12V
Flow : 90-280 mL/min
Weight : 105g