Slotting Cutter Arbors
Middle body diameter: 80mm
Speed regulation method: Through the three-phase output inverter, adjust the frequency of the inverter to change the spindle speed.
Cooling method: water cooling
Power interface: H20-4 pin waterproof aviation is optional. Aviation plugs marked with "1", "2", "3", "4", "1", "2", "3" connect to the inverter power supply (U, V, W), 4 connects to the inverter ground.
Power: 2.2kw
Voltage: 220V 380V
Current: 8A
Frequency: 400Hz
Speed: 24000rpm
Runout: less than 0.01mm
Bearing type: 2 x 7005 P4 DT and 2 x 7002 P4 DT
4 fully sealed angular contact bearings
Chuck: ER20
Clamping tool diameter: 13mm, 12mm, 12.7mm, 11mm, 10mm, 9mm, 8mm, 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)
Water-cooled ER20 chuck block
Grease lubrication