Power Supplies
600W 900W 1200W Programmable Regulated Power Sourec Adjustable Constant Voltage Constant Current Programmable Power Supply
Product Description
Feature:
(1) RS485 serial port is standard;
(2) SENSE serial port is standard;
(3)MUDBUS communication protocol;
(4) The set value and the actual value are displayed in the same frame and can be compared;
(5) The maximum is 11 days;
(6) Single up to 12 hours;
Application:(1) Aerospace Testing
(2) Photovoltaic and energy storage system
(3) energy vehicle
(4) Data center
(5) Industrial motor
(6) Power semiconductor module
(7) Automated test system (ATE)
(8) Lithium fuel cell
(9) Aging of electronic equipment
(10) Precision electroplating, splashing and surface treatment
Noted: PC changed name to PE!
Input voltage: 220V/110V+10%
Input frequency: 50Hz/60Hz
Output voltage: constant voltage range: 0-V rated value adjustable
Output current: constant current value range: 0-A rated value adjustable
Voltage stability: +(0.2%+0.05V)
Current stability: +(0.5%+0.05V)
Load stability: 0.5%
Protection functions: over-voltage protection, over-current protection, over-power protection, over-temperature protection, short-circuit current limiting
Cooling mode: intelligent temperature-controlled fan, adjust the speed according to the load
Voltage resolution: 4-bit LED display+1% ± 1 word
Packing List
1 * power supply
1 * Power cord
1 * Test line (clamp)
1 * Instructions
1*weight*8KG
1. Communication Function : The back can be equipped with an RS232/USB/485 programming interface, supporting Modbus programming instructions.
1.Adjustable regulated power supply: With five major functions: overvoltage protection (OVP), overcurrent protection (OCP), overvoltage protection (OPP), overheating protection (OTP), and short circuit protection
2.SENSE compensation: Remote measurement terminals can be optional on the rear panel. When an electronic load consumes a high current, it will generate a significant voltage drop between the connected device and the load terminal, which can compensate for the voltage drop in the load wire. You can use this terminal to measure the output terminal voltage for more accurate measurement data
3.Professional testing of power supply: Resolution: 10mV/10mA. High precision and resolution, low ripple and low noise. Suitable for use scenarios such as equipment aging and lamp testing
4.List function: You can use the list function to create various output change sequences, including multiple steps to set single step voltage, single step current, single step delay time, repeat time, and save list sequence files. After receiving the trigger signal, the power supply will start working according to the order you edited. This feature facilitates your testing, saves you time and improves your work efficiency
Detailed Images
==========
Hign-concerned Chemical : None
Model Number : 1560PE
Output Type : SINGLE
Size : 330*250*155mm
Weight : 5Kg