Specification:
Name: Drive control board
Size: about 55 x 55 x 16mm/2.17*2.17*0.63in
Mounting hole diameter: about 3mm/0.12in

Features:
1. The power supply voltage is 6.5V-27V, and the power supply cannot exceed 27V, otherwise the module will be burned. It is recommended to connect a 15A fuse in series with the current input terminal.
2. Dual motor interfaces, each with a rated output current of 7A and a peak current of 50A. The motor interface cannot be short-circuited. It is recommended to connect a 15A fuse in series.
3. A motor with a rated voltage of 24V, a motor with a rated power of 115W or less, and a motor with a rated current of 7A can work for a long time.
4. The activation signal and the forward and reverse control signals control the voltage at 3-6.5V.
5. Enable signal terminal (ENA) input PWM to adjust the speed. The PWM frequency range is 0-10KHZ, and the minimum PWM pulse width is 10us.

Package includes:
1 x DC Motor Driver
1 x 10-pin Male and female Connecting cable