Product name: Glassware dryer
Drying time: 8~10min
Temperature setting range: 40~120°C
Heater power: 800W
Number of air outlets: 12 holes/20 holes/30 holes, can be configured according to user requirements
Air duct specifications: Ф 17*190/Ф 12*190/Ф 8*160
Electrode power: 22W~30W
Product size: 40*40*45cm

Instructions:
1. Depending on the size of the glassware to be dried, insert the corresponding specification of the air duct into the air outlet of the top cover.
2.Turn the temperature control knob to the desired temperature. Plug in the power cord and turn on the power switch. Then the cold wind indicates that the green light is on, the engine is running to blow cold air. When the hot air switch is reactivated, the hot air indicates that the red light is on and hot air is blowing.
When the air temperature reaches almost the set temperature, the hot air indicator is off, the heating stops (the blower motor continues to operate) and when the air temperature falls below set temperature, the hot air indicator lights up and the heating continues.
3.When the glassware is dry, first turn off the hot air switch, wait for the glassware to blow, then remove it and make sure the airflow is cold, then turn off the power switch.

Attention tips:
Do not turn off the power switch immediately after drying to avoid residual heat inside the appliance and burn the motor.

Package includes:
Host*1
Ducts*12/20/30

【After Sales Service】 If you have any questions or suggestions about our products, please send us an email for feedback, we will reply you within 24 hours, and you will get friendly after-sales service.