Spec:

Item Type: Boat Depth Gauge
Material: Stainless Steel 316L Bezel + Anti Fog Glass
Installation Hole Diameter: Approx. 52mm / 2 inches
Depth Range: 0-100m
Operating Current: ≤60mA
Special Function: Waterproof
Grade: IP67, Back Cover IP5
Operating Temperature: -30-+75°C
Storage Temperature: -40-+85°C
Wiring:
1. Red Wire - +12VDC
2. NC
3. Orange Wire - Backlight (+)
4. Blue Wire - Power Negative (-)
Installation Steps:
Step 1: Drill a 52-53mm diameter circular hole in your center console or other pre installed location, ensuring there is at least 70mm of space behind the panel.
Step 2: Insert the gauge into the hole.
Step 3: Align the bracket screw holes with the screws on the back of the gauge, then tighten the screws, use the bracket and frame to clamp the panel tightly.
Step 4: Directly insert the power harness into the back of the gauge, then connect the corresponding sensor and harness according to the provided instructions and turn on the power.

Package List:
1 x Depth Gauge
1 x Power Cord
1 x 10M Depth Line
1 x Fixed Base
2 x Screws
2 x Nuts
1 x User Manual