Specifications:
Input Voltage: 6V~12V DC
Input Current: 2A~5A (related to voltage)
Output Voltage: About 500KV~1000KV
Input Cable Length: About 100mm(red is positive)
Output Cable Length: About 100mm
Arc Discharge Distance: 10mm~20mm

Instruction:
1. You can use two 3.7V lithium batteries in series, such as batteries, idle mobile phone batteries (remove the board, the recommended capacity is more than 2000mAh) or -metal hydride battery packs, 4V or 6V batteries.
2. This module is a finished module of high-voltage inverter transformer/booster for scientific small production. After inputting DC6-12V voltage at the input end, a DC high voltage of about 500,000 volts (about 1-2 cm arc) can be obtained at the output end. ), can be used as a high-voltage source for general experiments, electronic instruments, negative ion generators, and small scientific productions in Chinese subjects.
3. The way to judge whether the battery capacity can drive the maximum output power is to measure the battery voltage during arcing. The maximum power can be output if it is around 6V. Two small-capacity lithium batteries are connected in series to 7.2V, and the measured voltage has dropped to about 4V in the arcing state. The smaller the capacity, the lower the voltage will be. Therefore, it is recommended to use a lithium battery 2000mA, and it is best to match a battery 4000mA if possible.

Package Includes:
1 x High Voltage Generator