Specification:
Item Type: Flexible Coil Current Sensor
Model: ETCR150FA
Material: ABS
Application: Electronics industry, power communications, equipment manufacturing, power grid maintenance
Function AC leakage current, large current, high order harmonic current, complex waveform current, transient inrush current, phase, electric energy, power
Power factor and other detection
Detection Method Flexible coil CT: The output is the differentiation of current to time. By integrating the output voltage , it can be truly
Input Current
Coil Diameter Approx. 7.5mm / 0.3in
Range 0A~10000A~higher
Resolution 10mA
Accuracy Class ±1.0%FS (50Hz/60Hz; 23?±2?, below 70%, the wire is at the center of the coil)
Phase Error ?0.1°(50Hz/60Hz; 23?±2?)
Output Interface Approx. 3.5mm / 0.1in audio frequency plug/BNC plug/tap (optional)cable length: Approx. 2m / 6.6ft
Electric Field Interference No hysteresis effect, no interference from external electric field
Wire Position The tested wire is at the center of the coil, and the position error affects ?±0.3%FS
Current Frequency 45Hz~70Hz (frequency of measured current)
Response Frequency 0.1Hz~1MHz
Line Voltage Line test below AC 1000V
Working Temperature and Humidity -20?~50?; below 80%
Storage Temperature and Humidity -10?~60?; below 70%
Dielectric Strength AC 2000V/rms (both ends of the coil unlocked and expanded)
Suitable for Safety Standard CAT IV 600V, CAT ? 1000V

How to Use:
1. With an integrator, it is easy to integrate into other equipment, such as phase detection analyzers, industrial control devices, data loggers, oscilloscopes, harmonic analyzers, power quality analyzers, high accuracy digital multimeters, transient impact recorders, Distributed measurement system, system
2. Put the circuit to be tested in the circle, and it can be used after power