Slotting Cutter Arbors
Basic parameters
Dimensions 65x 258mm (body diameter 65mm; length: 258mm)
Speed regulation method: Through the three-phase inverter output, adjust the inverter frequency to change the spindle speed.
Cooling method: air cooling
Power: 1.5kw (1HP=0.735kw)
Voltage: 220vAC
Current: 6A
Frequency: 0-400Hz
Speed: 0-24000rpm
Runout deviation: 0.01mm
Bearing type: 2X7004 P4 DT and 2X7000 P4 DT
Fully sealed angular contact bearings
Chuck: ER16
Clamping knife diameter: 10mm, 9mm, 8mm, 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm
Air-cooled ER16 chuck block
P4 fully sealed angular contact bearings, 2×7004 P4 DT and 27000 P4 DT increase spindle life
The longer the length, the greater the torque and the more powerful it is.
Careful assembly makes the spindle more precise
Precision 0.01mm, coaxiality less than 0.0025mm
NOTE: Spindle size is 65 x 258mm mm and has more torque.
The spindle is very quiet and has almost no vibration.
Basic parameters:
Power: 1.5KW
Input voltage: 110V/220V
Current: 14A(110V) / 7A(220V)
Output voltage: 0~110V/220V
Input frequency: 50/60 Hz
Output frequency: 0-1000Hz
Input phase: single phase
Output phase: 3 phases