Universal chemical polyester dowel, approved and styrene free. It is designed for fixing medium load elements by bolts in non-cracked concrete and hollow or full partitions. It is an anchor that is suitable for static or quasian loads. Can be used to install stone paintwork or other elements such as air conditioners, railings or signs. It is approved to the highest quality standards: it has European approval ETA 24/0872 (option 7), which supports operation for structural applications in non-cracked concrete; with the ETA 24/1141 approval for masonry and with LEED and A+ certifications for low emissions. The styrene-free formula improves safety in enclosed spaces and contributes to a healthier working environment. It is an easy to install chemical dowel, suitable for indoor and outdoor use. Can be used in dry, damp and flooded drills. Before injecting the resin, it is important to clean the hole of dust or fragments of the drill and drain water. For materials such as concrete, it can be applied directly to the hole. For hollow materials such as bricks, a metal or plastic sieve must be used for fastening. In both cases, the beginning of the product must be thrown away until it becomes evenly grey. Once applied to the hole, a bolt must be inserted with your hand down by slightly screwing it in and making sure the gap is fully filled - making sure the resin overflows. Once installed, it can withstand a wide temperature range from -40°C to +80°C. This chemical anchor can be used with a wide range of INDEX A PERFECT FIXING accessories, such as caulking guns, galvanised steel and stainless steel asparagus or plastic and metal strainers.