Welcome to my store, we will provide you with high-quality products and high-quality services, if you have any questions about the products, you can contact us, we will reply you within 24 hours!

WSP Extendable Alloy Steel Universal Joint
Structural Characteristics:
1. The maximum interaxle angle per joint is 45 degrees.
2. Connect larger wheel spacing.
3. Finished hole tolerance H7, according to the requirements, it could process key slot, hex hole and quad hole.
4. The angle between the two axes was abled to vary within a limited range as required in work.
5. Joint part quenching 43 to 46 degrees, center slider quenching 48 to 52 degrees, pin shaft carburizing quenching 38 to 42 degrees.
6. Two types of bearings: Block bearings (up to 1000RPM). Rolling pin bearings (up to 4000RPM, high transmission accuracy, high dynamic load, small bearing clearance)
Installation Note:
1. When installing a single cross axis universal coupling, the main and driven end angle speeds vary, the main and driven axes can not be kept in sync, and their out-of-syncity varies with the angle.
2. To achieve the same angular speed and synchronous rotation, a double-cross-axis universal coupling should be installed or used by a combination of two single-cross-axis universal couplings and an intermediate shaft.
Notice:

Due to different monitors, there may be some color difference, which is normal.