【Calibration Function】: The tester calibration is used to eliminate errors in its own components, making the final test s more accurate. Calibration is divided into quick calibration and full function calibration. The full function calibration is accessed from the function menu and requires an additional 220nf acitor.
【Frequency Measurement】: The frequency measurement s from 1Hz to more than 1, when the measured frequency is below 25KHz, the period is displayed.
【F-Generator】: Square generator with mulle square s frequencies selectable, turn the test button left or right to switch between different square frequencies, long press the test button to exit the square generator.
【10-bit PWM】: Pulse generator, left or right turn the test button to adjust the duty cycle of the pulse from 1% - 99%. Press and hold the test button to exit the pulse generator.
【C+@TP1:3】: acitance in-line measurement function, two wires can be led from TP1 and TP3 to measure the acitance value and of a 2uF-50mF acitor in-line, note that the acitor under test needs to be completely disd before the test, if the measurement is in-line, the circuit where the acitor is located needs to be completely disconnected before the test can be carried out.
B&K Precision 815 اختبار مكون باليد
KWD 56
اختبار الحمل الإلكتروني 5A 35W سعة البطارية اختبار المقاوم فولتميتر AMMETER الحمل الإلكتروني الثابت
KWD 8
RIGOL DG5252 PRO PORFICE/مولد الموجة التعسفية ، 250 ميجا هرتز ، 2.5GSA/S ، 2CH ، 16bit
KWD 576.500
Fluke I17xx-Flex3000/4pk Iflexi Current Clamp ، 24 بوصة. محيط ، 3000a ، 4 عبوات
KWD 373
