300 Series Electric Water Pump with Stock Size Idler PulleyFord Modular 4.6L / 5.4L / V10 1996-UpFreewheeling Idler Pulley for Stock Serpentine Belt Routing Configuration55 GPMBlack Anodized Finish
Specifically for street driven and fully equipped race cars. Installation is nearly identical to the factory pump and can be completed in 2-3 hours. Innovative design makes for an easy installation. Unbolt your factory pump and bolt on an easy 11-14 horsepower with our street style water pump. An idler is incorporated onto the pump so your belt routing remains in its stock configuration. Aftermarket underdrive pulley sets may require a shorter serpentine belt. Provides cooler running in traffic. Cobra Note: 2003-2004 Cobra engines will not accept our modular pumps. There will be clearance issues.

Features: Fits Ford modular engines Idler pulley diameter: 5.10''Idler pulley design lets you keep all of your serpentine belt driven accessories Suitable for street or drag strip use - 3000+ hour life expectancy Show quality finish - clear anodized pulley Standard motor provides 55 gallons per minute free flow rating Stainless steel large diameter main shaft with high performance ceramic seal

Technical Specifications: Finishing The System: This pump is supplied complete. No additional items should be necessary. If you are installing the pump into a stock type vehicle you may want to consider relay kit #WIK346Amperage draw: Under normal use the pump will draw 11-12 amps. Overall Height Dimension: The standard pump is 3.75'' long from the mounting surface to the tip of the pump.Pump Weight: This application weighs 6.9 lbs.