الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
❃❃With micro single-chip system, this speed control can achieve simple system programming, which can suit better high-speed high-power brushless motors.
❃❃Rated voltage: DC 6-12.8V;Current rating: 32A (within 5s, max current can not exceed 40A)
❃❃Temperature Protection: The speed control has aluminum heat sink, which allows it work at 30 A continuously. When temperature reaches 110 celsius degree, temperature detect system will send a protection signal and system will auto decrease 60% power output to protect speed control and motor. It will back to normal power after temperature is decreased. To protect the actuator module, please dissipate heat during long-time using.
❃❃Safety Startup: To avoid any injury, the motor will not start up immediately if the potentiometer of speed controller is not at the lowest gear, which is necessary for high-speed high-power motor to protect user's safety.
❃❃The signal loss prevention: Auto shut down when there is no signal detected from PWM signal generator(potentiometer ).
وصف
30A ESC parameters:
Output: continuous current 30A, short-time current 40A (not less than 10 seconds)
Power input: 5.6V—16.8V (2-3 lithium batteries or 5-12 nickel-metal hydride / nickel-cadmium batteries)
BEC output: linear regulation mode, 2A
High speed: 2-pole motor (210,000 rpm), 6-pole motor (70,000 rpm), 12-pole motor (35,000 rpm)
Size: 45mm * 24mm * 11mm
Weight: 25g
Specification:
Rated voltage: DC 6-12.8V
Current rating: 32A (within 5s, max current can not exceed 40A)
Nominal power: 360W
Rated Power: 5V 0.5A
Temperature protection: 110°C
Speed range: 8%~98%
For motor poles: 2-18 pole
Start: flexible start/immediate start
Brake: reverse load /no brake
Speed signal: 8KHz/16KHz fixed frequency PWM