Flowmeter
High-Precision Organic Glass Rotor Floater Panel Type Flow Meter Gauge Liquid Water Gas LZM-15 1Pcs
Product Parameters Surface Treatment:Untreated
Product Name: LZM-panel flowmeter
Product Quantity:1Pcs
Panel type flowmeter is mainly composed of float, guide rod, body, external connection, etc., has good corrosion resistance, the product also has reasonable structure, small size, light weight, cone tube is not easy to break, etc. Rotameter can be widely used in water purification equipment, chemical industry, environmental protection, petroleum, medicine, food and other industrial sectors. Can also be used for scientific research in the laboratory.
1The flowmeter must be installed vertically, without obvious tilt, and its installation height should be convenient for reading the float. When reading, the line of sight and the float should be horizontal.
General standard: The optimal flow rate required is 50% -70% of the maximum flow rate of the flow meter. Try not to use the highest number. A
2 The inlet and outlet of the instrument shall ensure a straight pipe section with a diameter of 5 times the instrument diameter.
3The pressure of the side fluid must be stable. If the fluid is too unstable, it will cause the float to fluctuate and cannot be measured correctly. A buffer or a setter should be set upstream of the flow meter.
4 The flowmeter should be installed vertically. The angle between the centerline of the flowmeter and the plumb line should not exceed 5 degrees.
Overview:
LZM-series flowmeter in general Follow the instructions on the control panel The water outlets are on the back so Customers must open before installation Water inlet and outlet nozzle and instrument Fixed screw hole