Compatible With 1976-1979 F100- PU 4WD & 1976-79 Disc Brakes. Two front caliper hoses with front stainless axle lines. This Stainless Braided Hose has a DOT Plastic Covering so that meets DOT standards and provides a covering to the hose so that if gets dirty can be wiped clean. Frame Brackets: These hoses all the stock Front & Rear Frame Brackets Since the end fitting on the stock hose was shape or oval or hex may be necessary to hand file the hole of the frame bracket for a perfect . The new stainless hose will have a round end on . These are made to the same specification as the original rubber hose but is stainless braided. is a direct replacement. They are the correct length and have the correct end fitting sizes so they will screw right into the factory stock components as a direct replacement. These are Inline tube - Power Braid - Brand Hoses - MADE IN THE USA. They feature a clear hose covering that will prevent grease, dirt and oil from getting onto the braid hose. Simply wipe clean and they look like new again. This clear covering adds DOT strength the ends and will not yellow. This is the latest technology in Stainless Braided Hoses. These will also increase stopping power since they do not expand like a stock rubber hose. These hoses run to transfer fluid from the hard line to the wheels. They up and down with suspension travel. Originals are usually dry rotted ,cracked and unsafe. Beware NOS hoses can also be dry rotted from sitting around 35-40 years. So check your pride and joy..