1: Since the sticker is rolled up during packaging, when you receive the product, you will see bubbles in the transfer membrane, but the sticker is intact, it will not have any impact on your stickiness and effect. After the sticker is finished, the transfer membrane needs to be removed.

2: Once you have received the stickers, you can spread them out and flatten them with something heavy until they don't roll back automatically, which makes it easier to install.

Wolf Stripes Hood Deals

Packaging: 1x car decal.

There three different sides of the sticker, the bottom paper, the sticker layer, and the transfer membrane. You can identify which side is the bottom paper by hand before installation.

Due to the large size of the sticker, two or more people can work together to complete the sticker.

INSTALLATION STEPS:

① Cleaning the car to remove dust, removing the bottom paper, spray water on the side of the sticker with glue to reduce the viscosity, which is convenient for adjusting the position and removing bubbles.

② After sticking the sticker on the car body, lift the sticker on one side and scrape it slowly and gently from the other side with the card, while scraping the bubbles while adjusting the position of the sticker until the entire sticker is scraped.

③ Wait for the water in the sticker to dry, peel off the transparent transfer film carefully.

④ The extra stickers at the door and the seam can be cut off with a knife.

Application: Universal for all cars, suvs, trunk etc. For car hood or car side body or any other flat and dust free place.

Material and Size: Vinyl material. 50.9*13 inch (129.5*35cm).

Colors: Black/ Red/ White.

Tips and Notes:
① Don't wax the car one week before using the sticker.
② Don't wash your car within one week after filming. It is best not to expose it to exposure within 24 hours.
③ Due to manual measurement, please allow a deviation of 1-3 mm.
④ During photographing, there may be slight color difference due to lighting, environment and other factors.