Simplified Fitment Application (Please Use Amazon Part Finder at the top of this page, Enter your vehicle detailed information to make sure Fitment):

2001-2003 for Acura CL
2001-2002 for Acura MDX
2002-2006 for Acura RSX
1999-2003 for Acura TL
1998-2002 for Honda Accord
1997-2004 for Honda CR-V
2004-2005 for Honda Civic
2003-2011 for Honda Element
1997-2001 for Honda Prelude
2000-2009 for Honda S2000
Note: Wheel Hub Bearings must be torqued to vehicle specifications to prevent failure.

Installation Steps

1. Raise the vehicle and remove lug nuts and wheel rim.
2. Remove the brake caliper and rotor. Support the brake caliper with an “S” hook or a piece of wire.
3. Remove the axle nut, using an axle nut socket. Follow the manufacturer's instructions for nut replacement.
4. Disconnect the ABS sensor wire from its mating connector point and positioning clips. *Make a note of the proper orientation and positioning of the sensor wire and bearing.
5. Remove the steering knuckle attachment bolts. *You may need a puller to remove the hub assembly. DO NOT damage the knuckle or axle shaft.
6. Remove the old hub, Clean and inspect the steering knuckle. Remove any debris, nicks or burrs using a fine file, wire brush, emery cloth or honing stone.
7. Reverse the above steps and actions to install the new wheel hub back.
*Professional Installer Recommended
*No Instruction Included