Specifications
▪ Name : Battery Terminal Top Post
▪ Main Body Quality Brass + Iron Screws
▪ Quantity : 2 positive(red) + 2 negative(black) terminal post
▪ Anode Aperture : 17-19mm
▪ Aperture of Negative Electrode : 15-17mm
▪ Wiring Mode : Tighten the nose screw
▪ Maximum Bearing Current : 300A
▪ Function : Connect the battery and battery cable. As long as the size is suitable, it can be used;

Features
▪ Main body is high-quality brass, one-piece molding, good electrical conductivity;
▪ Strong oxidation resistance, and good corrosion resistancehighly resistant to corrosion from marine environments and battery acid;

Applications
▪ Suitable for large-end batteries;
▪ Designed to fit all standard top of post batteries with positive pole 17-19mm, negative pole 15-17mm;

Installation Steps
1. Remove the positive and negative poles of the original car from the battery pole and separate them from the battery cable (disassembly-first remove the negative pole, then the positive pole)
2. Press the battery wire of the nose wire onto the battery clamp. Note that the battery wire must pass through the sheath before installing;
3. Install the positive pole first, and then install the negative pole. Put the crimped battery clamp on the battery pole, tighten the screws to fix the battery clamp, and the positive pole installation is complete. The installation method of the negative pole is the same as that of the positive pole;

Note
▪ Manual measurement, error 1-3mm, depending on the actual situation, please understand;
▪ You can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund.