The console powers on, the bottom screen flashes, and then it shuts off. This is usually caused by a torn ribbon cable that makes an open backlight circuit for the top screen. The motherboard circuit is designed so that the console will not power on unless there is load resistance for the backlights of both the bottom and upper screen.
How to Install
You'll need to transfer the colored bezel over from your old screen. Do this by pinching the adhesive on the bottom right corner of the screen and carefully pulling up; the bezel should come up with the adhesive in a single piece. Use the top shell piece as a guide for reassembly.
Please be aware the speaker wire connections are fragile, and if not handled gently, the speakers can rip off. If your screen arrives with the speakers disconnected, please contact me.

__________________________________________Shopping at the name - BLUE ELF, be sure of the qua-lity and service.