Installation Method:
1. Remove DVD navigation.
2.navigation host, on the rear line to find the steering wheel multifunction control line, ACC line, ground wire, specific line function, consult the browser manufacturers.
3.The receiver has a corresponding bit line ACC stickers for automotive ignition cable, GND for the ground line KEY1 and KEY2 for the control line connect the corresponding line.
If the navigation host has only one direction control line, connect Receiving KEY1 and KEY2 to navigation at the same time ( Learning to copy If there is a button learning is not successful, please adjust the KEY1 KEY2 line)
4 Enter the DVD navigation settings, find the learning of the multifunction button (Steering wheel settings), press and hold the button to learn the corresponding function (see DVD navigation instructions for specific operations)
5. Enter Android navigation or DVD navigation (Steering wheel configuration or steering wheel learning interface) Volume-, volume +, silence, previous song, next song 5 buttons together for 10 seconds to pair, after pairing correctly, the control receiver The direction of the plug can see a red light on, which proves that the pairing has been successful.
(You can see the red light in the small hole of the address control receiver at night.) The button works when you answer the phone and hang up the phone is the same as the previous one.
Next, enter Android or DVD navigation (Steering wheel configuration or steering wheel learning interface) for each learning button.
6. Note: Each button can also be customized to learn.
It does not matter if you do not understand.Please leave us a message in the order.