Ignition coil for the Honda small twins from the 60's and 70's. Get that CB160 sparking again and back on the vintage race track or out on the street!

Specifications:
Mounting Hole Spacing: 102mm (4") (measured center to center)
Overall Length of Mounts: 116mm (4.5") (measured end to end)
Coil Dimensions: 79mm long x 46.7mm wide (3.1" x 1.8")
High Tension Wire Length: 20" (spark plug wire)
Low Tension Wire Length: 8" (male bullet terminals)
Primary Resistance: 4.0 ohms +/- 10%
Secondary Resistance: 14.1k ohms +/- 10%
Voltage: 12
Replaces Honda part numbers: 30500-216-405, 30500-216-000
Note: May also fit the CA72/77, the specs are correct but custom mounting may be required.

Fits Honda:
CB160 Sport - 1965-1969
CL160 Scrambler - 1966-1967
CB175K - 1969-1973
CL175K Scrambler - 1968-1973
CB200K - 1974
CB200T - 1975-1976
CL200 Scrambler - 1974