1. Direct screwed radiator support kit, specially designed for K-Swapped chassis, adapts perfectly to EG DC2 EK 1992-2000.
2. These supports are screwed to the upper and lower supports, which allows you to easily install the radiator in the driver's side compartment.
3. Includes 2 different upper supports, one for EG chassis and one for EK/DC2 chassis, use.
4. It comes with hardware, the upper radiator support is covered with silver dust, the lower support is made of stainless steel and adopts polyurethane joints.
5. The well nuts slide through the hole in the lower support and then, when the mounting Screw/Fastener is tightened, the well nut becomes on the back creating a safe mounting point for its new supports.

Specs:
Article type: radiator support kit
Material: steel + polyurethane
Assembly: Apt for EG DC2 EK 1992-2000
How to use:
1. Starting with a 1/8 inch drill, carefully drill the hole that has just marked.
2. After that, you can pierce the hole to the final size of 1/2 inch.
3. Then insert the well nut into the perforated hole.
4. Tighten the m6 Screw/Fastener

Packaging list:
1 radiator support set (11 pieces)
1 x Screw/Fastener
1 x nut
1