مميزات خاصة

【Common Specification】: In the battery cable terminal clips, the red plastic casing is the positive battery terminal and the black plastic casing is the negative battery terminal, red and black are a pair. We provide two kinds of packaging for you, one pair and two pairs, so that you can choose to buy according to your actual needs.
【High-quality material】: the battery terminal with plastic cover is made of high-quality copper with galvanized surface, which is rust-proof and durable. Efficient conduction, reducing voltage distortion and transmission loss. Strong and durable, with excellent rust, oxidation and corrosion resistance. The protective shell is made of hard plastic, which is tightly waterproof and wear-resistant.
【Easy to use】: This battery terminal connector has positive and negative terminal components; Each battery connector is equipped with an M8 nut for easy installation. Easy disassembly, easy cleaning and maintenance, and no damage to the original car.
【Widely Applicable】: The positive and negative electrodes have the same appearance, with different hole diameter sizes. The positive pole hole is 0.75 inches (19mm) in diameter and the negative pole is 0.67 inches (17mm). They are suitable for most car models, such as sports cars, minivans, SUVs, large vans, trucks, taxis, etc. Please check if the size matches your car before you buy.
【Professional Services】: If you have any questions or dissatisfaction with the Battery Terminals, please contact us, we will reply you as soon as possible within 24 hours, we always take your satisfaction as the ultimate goal.

وصف

Material: Iron + Galvanised

Color: Red(+), Black(-)

Positive Hole Diameter: 0.75 inches (19mm)

Negative Hole Diameter: 0.67 inches (17mm)

Weight: A Pair 85g

Size: 0.3 * 1.1 * 2.2 inches (Upper Width * Bottom Width * Height)

Package Include: 1 * Red + 1 * Black + 2 * Washer / 2 * Red + 2 * Black + 4 * Washer

Installation Steps:

1. Remove the positive and negative terminals from the original battery, first remove the negative terminal, then the positive terminal.

2. Press the battery cable of the nose cable onto the battery clip, note that the battery cable must pass through the sheath before installation.

3. Install the positive pole first, then the negative pole to prevent short circuit.

4. Place the crimped battery clip on the battery pole, tighten the screw to fix the battery clip, the positive pole installation is complete.

مرحبًا،

بحث

موصل طرفية البطارية ، أعلى طرف بطارية تلقائي أو إيجابي وسلبي مع قيعان بلاستيكية (معلبة النحاس) ، وملحقات سيارة التآكل المقاومة للتآكل (1Dred1black)

مميزات خاصة

وصف

منتجات شبيهه