【Specification】:

Material: high quality rubber
color: red
Applicable models: 99% models can be used
Product selection: the weight of each model is different, calculated according to the model aligned with the model

【installation method】:

1. Use a jack to lift the wheel in the air.
2. Wipe the shock absorber spring with clean water (wipe several times) to ensure that the spring is clean and free of grit, which will reduce the life of the shock absorber.
3. Apply soaked soap on the shock absorber spring, and apply soaked soap in the groove of the strong buffer; wash your hands and install the strong buffer into the spring (install the upper groove first, then install the lower You can also install half of the upper and lower grooves first, and then rotate to install the rest until the springs are all located in the grooves, and the excess can be cut off with a knife).
4. Finally, turn the notch to the middle of the inner side after installation, and make sure that the springs are all in the groove, and then the body can be put down.

【Package List】:

2 * Shock Absorber

【Product performance】:

1. Adopting the principle of buffering, the shock absorption performance is obviously improved. The shock absorption effect can bring the ride comfort of the car to a higher level, especially when crossing pits and hurdles.
2. The stability is significantly improved when making sharp turns on non-tarmac roads and bumpy roads.
3. Restrain the vibration of the vehicle body caused by the uneven road surface during the driving process of the car, thereby reducing the vibration noise during the driving of the car.
4. Properly increase the height of the car body to improve the passing performance of the road obstacles of the car.
5. Protect car shock absorbers and suspension systems.