Short control cable set for the Honda CB/CL350K twin. This cable set is great for drag, clip on or clubman handlebars! Usually it is a good idea to replace all of the control cables if you recently purchased a vintage Honda. The riding experience can be vastly improved with fresh control cables, especially if your bike is still running the stock cables or old stiff cables. Remember to lubricate new cables prior to installation.
Short control cable set for the Honda CB/CL350K twin. This cable set is great for drag, clip on or clubman handlebars! Usually it is a good idea to replace all of the control cables if you recently purchased a vintage Honda. The riding experience can be vastly improved with fresh control cables, especially if your bike is still running the stock cables or old stiff cables. Remember to lubricate new cables prior to installation.
Cable Dimensions:
Throttle Cable: 36 1/4" Total Length - 34" Housing - 1 5/8" Slack
Clutch Cable: 49" Total Length - 45 1/4" Housing - 3 1/2" Free Play
Front Brake Cable: 46 1/2" Total Length - 42 1/2" Housing - 3 7/8" Slack***
Note: Early CB350K0, CL350K0 models from '68-'69 have the brake light switch built into the cable assembly. To use the front brake cable, replace the lower half of the right side switch assembly with one from a later production bike that's designed for the handlebar mounted switch. Or replace the complete assembly.
Fits Honda:
CB350K1-K4 - 1969-1973
CL350K1-K4 Scrambler - 1969-1973
