Ignition coil and spark plug cap set for the Honda small twins from the 60's and 70's. Get that CB160 sparking again and back on the vintage race track or out on the street!
Specifications:
Mounting Hole Spacing: 102mm (4") (measured center to center)
Overall Length of Mounts: 116mm (4.5") (measured end to end)
Coil Dimensions: 79mm long x 46.7mm wide (3.1" x 1.8")
High Tension Wire Length: 20" (spark plug wire)
Low Tension Wire Length: 8" (male bullet terminals)
Primary Resistance: 4.0 ohms +/- 10%
Secondary Resistance: 14.1k ohms +/- 10%
Replaces Honda part numbers: 30500-216-405, 30500-216-000, 30400-306-673, 30400-306-672, 30700-MG7-000, 30700-KE2-942
Note: May also fit the CA72/77, the specs are correct but custom mounting may be required.
Fits Honda:
CB160 Sport - 1965-1969
CL160 Scrambler - 1966-1967
CB175K - 1969-1973
CL175K Scrambler - 1968-1973
CB200K - 1974
CB200T - 1975-1976
CL200 Scrambler - 1974