Motors
Servo Motor With Magnetic 17bit Absolute Encoder
Servo Motor Model
Motor Flange
Power
RS485
cable
length
Brake
Motor Shaft
Diameter
60AST-A1C01330
Nema24 60mmx60mm
(mounting hole distance
49.5mm)
400w
Support
Support
(3-15meter)
Optional
14mm
With 5mm Key
60AST-A1C01930
600w
80AST-A1C02430
Nema32 80mmx80mm
( mounting hole distance
63.6mm )
750w
19mm
With 6mm Key
80AST-A1C04025
1000w
4pcs 400W / 600W / 750W / 1KW 220V Servo Motor ( 17 bit absolute )
4pcs T3D-L15A/ T3D-L20A AC Driver
4pcs 3Meter Encoder Cable + Power Cable
4pcs Control Signal Cable
8pcs 2K 1/4W resistance
4* RS485 Cable (Optional)
1.Stable performance and fast response
2.Advanced heat dissipation design process
3.Applicable to various automation equipment
Symbol
Name
Function
POW
Power Light
(none)
The decimal point of the second digital bube from the left lights up to indicate that the servo is under voltage
RUN
Runing light
(none)
The decinal point of the first digital tube from the left lights up to indicate that the servo is enabled
Add key
Increase the serial number of value, long press has repeat effect
Decrease Key
Decrease the serial number of value,long preass haas repeat effect
Exit Key
Menu exit, operation cancelled,
SET
Enter
Menu Entry,parameter modification confirmation or operation confirmation
Set After Power on:
Find P-098 and change it to 1
Find the E-SEF, press and hold the confirmation key until it shows DONE. then the parameters has been saved successfully. After all parameters are set, power off and restart.
Common parameters:
P-036 is changed to 1 (reverse direction) 0 (positive direction) motor direction conversion parameter. The default is 1 reverse direction
P-029 (electronic gear ratio numerator) is 1 by