Motors
1pcs-4th Axis 100mm 3/4 jaw chuck 6:1
( positive jaw and counter jaw) (& Closed Loop Stepper Motor 57HS20N
1pcs HBS57 Hybrid StepServo Driver
1pcs TailstockMovable and ChangeableUnchangeable Tailstock With Head
100MM 34 jaws selfcentering handle
Center height 65mm
Total height 115 MM
Angle, 1.8 degrees / step
Reduction ratio: 6 : 1 ( deceleration mode)
Magnetic stepper motor: Nema23 Closed Loop Stepper Motor 57HBS20N 2.2N.m
The system settings: the pulses for 1 required:
( the motor 1 Circle of pulse number × the drive of subdivision number × reduction ratio) ÷ 360 degrees
For example, the two-phase 57 motor, the ubdivision number 16, the reduction ratio 50:1
(200 × 16 × 50) ÷ 360 = 444.44444444)
Ncstudio system settings: the angle of a pulse walking:
360 ÷ (the motor 1 Circle of pulse numberr × × the drive of subdivision number × reduction ratio)
For example: the two-phase 57 motor, the breakdown of the number 16, reduction ratio 50:1
360 ÷ (200 × 16 × 50) = 0.00225
X or Y axis instead of the algorithm is:
Circumference ÷ (the motor 1 Circle of pulse numberr × × the drive of subdivision number × reduction ratio)
Engraving different sizes of round bars, equivalent needs to be set
Current / Phase : 3A
Holding : 2.2N.m
Resistance : 0.38±10%
Inertia : 0.48KG.CM2
Inductance / Phase : 1.62MH±20%
Weight : 1.25KGS
Step Angle : 1.8°
Position Accuracy : 1.8°±0.09°
1.Without losing step,high accuracy in positioning
2.100%rated output
3.Small vibration,Smooth and reliable moving at low speed
4.Compatible with1000 lines encoder
5.Over current,over voltage and over position error protection
1.Short cylindrical center mounting.
2.Model K11/K12 chucks are provided with one-piece.Jaws(which include a set of intermal jaw and a set of external ones).
3.The jaws for K11A/K12A ,K11C/K12C and K11D/K12D chuck are composed of two-