Motors
1pcs - 4th Axis K11(3Jaw) K12(4Jaw) 50mm/63mm
The fourth axis is matched with a 42 stepper motor, and the wheel deceleration is 4:1.
1pcs - Tailstock (Center height 44mm / 54mm )
Basic parameter
50mm/63mm/ (K11)3 jaws / (K12)4 jaws self-centering handle
Center height 44MM/45mm
Total height: 75mm / 85mm
Reduction ratio: 4:1
Magnetic stepper motor: Nema17 stepper motor
The 50 chuck is non-through, and the concentricity is within 10 wires. The pinion gear of the chuck is 15 small teeth, the clamping range is 1-33mm, and the clamping range is 16-50mm.
The 63 chuck is non-through, and the concentricity is within 10 wires. The pinion gear of the chuck is 15 small teeth, the clamping range is 1-50mm, and the clamping range is 16-50mm.
Features:
1. The chucks have two mounting types: the short cyindrical center mounting and the thread mounting.
2. The compact chucks are small volume, easy to be used and enjoy a high centring precision as well as a large calmping range.
3. The chucks are made for meter machine toolsin the processing of non-ferous metals, non-matals like plastics and so on.
4. Steel body.
Basic parameter:
Model: 42HS4813A4CEL06
Step Angle: 1.8°
Rated Voltage: 4.16v
Current: 1.3A/Phase
Resistance: 3.2/Phase
Inductance: 5.5mH
Holding : 52N.cm
Detent : 2.6N.cm
Rotor Inertia: 68g.cm2
Motor Lenth: 48mm
Lead Wire: 4.NO
Motor Weight: 350g