Motor Oil Fluid Extractor Electric engine oil Transfer Change Pump 12V

Feature:
Item: engine oil pump
Voltage: DC 12V
Pipe: 1x outlet;2x inlet(4mm,6mm)
It is not fit to pump gasoline! Gas pumping does not guarantee the warranty!
Usgae:
1st, The engine must be preheated to about 30-60 degrees ! (This is very important);Also it could be tested by your hands by feeling the warmth of the engine , slight warm will be great.
If it's too low, it won't pump up, if it's too high, the electric pump will break (the electric pump can stand with a temperature of under 60 degrees)!
2nd,Then make the oil suction pipe as straight as possible and slowly insert it into the oil dipstick port . Do not insert the pipetoo rush. You can feel it by hand to avoid insert too more, otherwise the tube will bent inside and cannot pump up oil. Usually, when pipe go inside about 80cm, you can turn on the power to pump.
Trouble shoot:
When the electric pump not be used for a while and the electric pump does not pump out oil?
Solution: 1st,please unplug the water inlet and outlet pipes.
2nd,find a used syringe (get ride of the needle), and push the water into the inlet pipe
(Do the step 2 with pump power on. )

Maintenance:
1,don't pump corrosive liquid.
2,clean it up after use, this will keep the pump a long lifespan