Fits Model
for KYMCO AGILITY 4T R10 50 2006/2006 U60010
for KYMCO AGILITY 4T R12 50 2007/2008 U60050
for KYMCO AGILITY 4T R10 50 2007/2008 U60080
for KYMCO AGILITY R12 50 2005/2005 U60000
for KYMCO AGILITY R12 50 2005/2005 U60000
for KYMCO DINK 50 4T 50 2007/2007 U50000
for KYMCO FILLY LX 50 2001/2002 S21000
for KYMCO FILLY 50 1998/2000 SD10AC
for KYMCO PEOPLE S 4T 50 2006/2008 B91000
for KYMCO SENTO 50 2008/2008 U80000
for KYMCO VITALITY 4T 50 2004/2004 U31000

Does not fit for Kymco Super 8 4T vehicles.

Specifications
Number of wires: 3
Number of plugs: 1x 2-Pin T-shape plug with 1 trailing wire connector
Number of pins: 2 + 1
Number of fixation holes: 2
Number of poles: 8

Please compare the number of pins and plugs with the old part before purchasing.

Size:
Diameter of Central Hole (Smallest): 29 mm
Outer Diameter Of Stator Poles (Greatest): 83 mm
Mount hole spacing center to center: 41 mm

Replacement Part Number:
31120-LBD6-E0A

Package Included:
1x 8-Pole Stator Generator

NOTICE:
Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.