Converter
Parameter Description
Module nature: boost module (non isolated)
Conversion efficiency: 92~96% (efficiency is related to input and output voltage, current, and pressure)
Waterproof grade: IP67
Working environment temperature: -20~+85 (if the environment temperature is too high, please strengthen heat dissipation)
Shell material: aluminum profile shell encapsulation
Material: Epoxy resin potting
Size: 74 * 74 * 32mm
Wire specification: 13-14cm (pure copper)
Product weight: 270 grams
After receiving the converter, you can use a multimeter or voltmeter to measure whether the voltage at the output of the converter is correct. If the voltage is normal, you can supply power to the electrical appliance. Please strictly follow the following wiring methods for wiring.
User's Manual
The 121V battery voltage is converted to voltage.
Precautions
!!!Long-term use cannot be fully loaded, please reduce power or choose more powerful products, best 50% of maximum power.
1. Make sure that all the polarity is correct, and the anti-negative conversion converter (except for input tape reverse protection)
2. Make sure the cable is pure copper wire, the input and output cables cannot exceed 2 meters, and the output will be removed by more than 2 meters. The voltage will be reflected. If the line is extended, you need to increase the line diameter according to the corresponding multiple.
3. The cable needs to be connected to the thread, please refer to the wire diameter size and securely connected.
4. The input terminal is required to connect the fuse or air switch, and you need to select the corresponding fuse or switch] (except the input belt fuse)
5. Make sure the battery capacity is large enough to provide sufficient energy. If the input energy is not enough, the voltage will be reduced.
6. Make sure the installation environment is well ventilated, so as not to protect over temperature prote