1. With automatic switching function, withstand harsh working conditions, ensure life and reliable performance.
2. Water meter with arbitrary rotation function, easy to read the meter. The digital display section above the water meter can visually display the total cubic number.
3. The counting system uses a vacuum seal to prevent condensation atomization and clear reading. The glass panel allows you to read the data clearly.
Features:
Good sealing effect, easy installation.
Brass material, durable, high temperature resistance.
When the product reaches 50W load, the intermediate material must be added, otherwise it cannot be used.
Working method: When there is water flow in the water flow switch and the water flow rate is 1.5L/min, there is water flow in the water flow switch. The flow pushes the displacement, and the displacement source produces the control effect, so that the output of the water flow switch is "switched on" and input to the equipment control system, and the control system realizes the control function. When the water flow rate is less than the starting flow rate, the water flow switch outputs an "off" and the control system produces the same reverse control.
Specifications:
Material: Brass
Thread :DN20
Inner diameter :18mm, outer diameter :26mm
Thread :15 mm
Switching current :0.5A
Load current :0.5A
Contact resistance :100mg
Load power :50W
load
Minimum decomposition
Starting water flow rate :1.5L/MIN
Working flow
Starting water pressure :0.1Mpa
Water pressure :1.75Mpa
Operating temperature :1~120℃
Applicable temperature :-20~150℃
Response time :0.2S
Release time :0.2S
Size: about 6.2 x3.3 x3cm / 2.44 x1.30 x1.18 in
The package includes:
1 meter counter
Attention:
Please allow 1-2cm error due to manual measurement, please make sure you do not mind before ordering.
Due to differences between different