مميزات خاصة

Full Backing Design: Upgraded full adhesive backing design of the door latch cover, except for the necessary holes, the rest of the position can be tightly adhered to the door locks, reducing the shedding, and further improve the sealing properties
Protect & Noise Reduction: Using the car door lock cover, avoiding the rust problem caused by dust/water directly contacting the door lock, and at the same time can reduce the hard contact between the door and the door lock, reducing the annoying noise
Weather-resistant TPE: The use of TPE as the main material of the door lock cover, soft and flexible, and its good weather resistance to avoid brittle cracks and deformation due to temperature changes, so that the protective cover works normally
Product Specs: Car door latch cover*4 is prepared for you, the total size is 3.57*2.71*0.47 inch, the ID of the small hole is 0.4 inch, raised bolt round holes for upper and lower further increase cushioning effect without affecting the bolts
Steps to Use: 1. Wipe the door lock surface clean. 2. Tear off the adhesive backing film of the door lock protector, stick the door lock protector to the door lock surface, it can be used with a hair dryer to warm it up to provide the adhesion

وصف

UPGRADED CAR DOOR STRIKE PROTECTOR, MAKE YOUR CAR DOOR LOCKS LAST AS LONG AS NEW

Product Attributes
Colors: Black
Sizes: Total Size: 3.57*2.71*0.47 inch / Hole Diameter: 0.4 inch
Weight: 1.55 oz
Material: TPE
Packaging: Car Door Strike Protector*4

Product Functions & Features
1. Upgraded Adhesive Backing Design: Upgraded full adhesive backing design can expand the contact range between the door lock and the protective cover to avoid shifting/falling off due to vibration in the vehicle or external factors
2. TPE Material: Waterproof and flexible, able to maintain the stability of color and performance when exposed to sunlight for a long time, prolonging the service life
3. Multi-function: Protect the door locks to avoid rust problems, reduce the direct collision between the door and the door locks metal, low-profile door locks decorative, reserved upper and lower bolts position does not affect the door locks bolt

Product Installation
1. Wipe the door lock surface clean
2. Tear off the adhesive backing film of the door lock protector, stick the door lock protector to the door lock surface

Tip: Can be used with a hair dryer to warm up the backing to improve adhesion. Do not touch water on the surface of the installation location within 24 hours after installation

مرحبًا،

بحث

4pcs حامي إضراب باب السيارة مع دعم كامل لاصق ، وغطاء قفل باب السيارة المطورة للسيارات حماية/زخارف مزلاج ، إكسسوارات إكسسوارات TPE ، حارس الأبواب

مميزات خاصة

وصف

منتجات شبيهه