The Sway Control is used to reduce trailer sway and improve handling in adverse towing conditions. Sway control units dampen trailer sway caused by crosswinds and traffic. Both friction and dual cam designs improve stability and increase towing safety.

Also included is the bolt-on sway control adapter. Bolt-on sway control adapter attaches to standard 2 inch ball mounts to provide a mounting point for friction sway controls. The ball mount platform must be 2-1/2" wide and have a 1" ball hole. The adapter is made of 3/8" thick material and mounts under the hitch ball. When installed, the shank length of the hitch ball must be long enough to allow at least two threads to be visible when the hitch ball is installed and the nut is completely tightened. A hitch ball with an extra long shank may be required. The adapter fits standard 2" ball mounts equipped with 2-1/2" wide ball platform - sold separately. The ball hole size for the hitch ball is 1" and 5/8" for the sway ball. It features a black powder coat finish over e-coat resists corrosion.

Use of Sway Controls with surge brakes is not recommended.

A and C Trailer Tongues Only. Will not adapt to pole tongue trailer frame.

The adapter cannot be used with Class I drawbars/ball mounts. Ball platform does not prevent adapter from turning during tightening.