Eastwood's Original Chassis Black Gloss is the perfect coating at the perfect price for any under car component. Matches OEM finish
The 85% gloss finish creates a custom look with superior protection on suspension parts and frame. Tough, long-lasting formula resists chips and corrosion, so it's ideal for the value-conscious enthusiast.
Note: This paint can not be applied over top of self-etching primers.
Chassis Black Gloss applies smoothly over bare metal, Eastwood Rust Encapsulator, or Eastwood Chassis Black Primer. (Not for use over self-etching primers.) High-solids content, pre-thinned to sprayable consistency. Withstands temperatures up to 300°F. 30-day Eastwood warranty.
Application Tips
Eastwood's Original Chassis Black is formulated to provide you with the right sheen, durability and long-lasting great looks. Its 85% gloss level is correct for many factory restorations or use in a custom application. Ideal for frames, suspension components, roll bars, differentials, floor boards and much more.
DirectionsREAD ALL INSTRUCTIONS BEFORE USING
1. Ensure surface is clean and free of debris, greases and oils. Use Eastwood's Chassis Kleen and/or PRE to remove stubborn grime.
2. Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320-grit abrasive. For the best adhesion apply Eastwood's Extreme Chassis Black Primer prior to painting.
3. SHAKE CAN VIGOROUSLY FOR AT LEAST ONE MINUTE. Apply to surface with steady strokes about 8-10 inches from surface.
4. Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat.
Safety Information
Always wear eye, skin and respiratory protection when painting. Follow label directions and consult MSDS for specific warnings.