Universal fuse box assembly for many different Yamaha models listed below. Most of these models did not have a removable fuse box from the factory, so you will need to splice this box into your existing harness using the supplied connectors. This creates a much better system because after the work is done it can be easily unplugged. The two mounting points can be used or just zip tie it in place.
Tired of dealing with the stock corroded / melted fuse box that's missing the cover? Now's the time to pick up a new assembly and stop breaking down because of a blown fuse!
Specifications:
Comes with three 10A and one 20A fuse installed - if these don't match the stock system just swap them out.
8 Pin female terminal connector installed
1 Male 8 Pin terminal connector
8 Male spade terminals
Wire harness length: 9.5" (measured to end of the white plug)
Wire colors: 2 red, 2 red/yellow line, 2 brown, 2 red/white line
Mounting holes = 94mm (3.7") measured center to center
Box dimensions = 3 1/8" x 2 3/8" x 3/4" (excluding mounting points)
Fits Yamaha: (Modification to stock wiring is required)
XS360C/D - 1976-1977
RD400C/D/E - 1976-1978
XS400D/E/F/SG/SH - 1977-1981
XS400J/RJ/K/RK - 1982-1983
XJ550H/RH/RJ/RK - 1981-1983
XS500B/C/D - 1975-1977
FZ600/S/U - 1986-1988
XS650D/SE/2F/SF/G/SG/H/SH/SJ/SK - 1977-1983
XJ650/G/H/LH/J/LJ/RJ/K/LK - 1980-1983
XJ750J/K/MK - 1982-1983
XS750D/2D/E/SE/SE-31/F/SF - 1977-1979
XS850G/LG/SG/H/LH/SH - 1980
XJ1100J - 1982
XS1100E/F/G/LG/SG/H/LH/SH - 1978-1981