24V Engine Flame Out Device Off Valve XHQ-PT- NC
: technical parameter
The purpose of working V: (9-15V ) 24V (18-30V )
Travel: 53 + 1mm.
The maximum tension: 90N.
An ambient temperature: -30 to 60 DEG C
The action time: less than 2 seconds.
An overload extinguisher: the load is too large or stuck, stop working automatically,avoid flameout device damage. Disconnect the power off after a period of time, re power,extinguisher from fault reset, can resume normal work.
Two, flameout device wiring:
The flameout device has 3 lead wires, as follows:
Red: connect the power supply: the cathode of a power supply (yellow green or blue)as the line of control:
Open type: control line power extinguisher action, action in place, automatic stop. The release of extinguisher power, action in place, automatic stop.
Closed type: control line power extinguisher action, action in place, automatic stop.Release extinguisher power control line, automatic stop action in place.
Three, installation and notice
The installation and commissioning should ensure the extinguisher action in place before, engine stop control rod no action to the limit position and the extinguisher stuck,otherwise the extinguisher internal overload circuit, automatic flameout device stops working, the extinguisher should disconnect the power, adjust the mounting position, back to the extinguisher on electricity, flameout which can resume normal work.
Model Number : XHQ-PT-NC/XHQ-NO
optional : 12V/24V
type : NC
Application : generator
fuction : flame out device
the action time : less than 2 second