Control Units
HGM180HC Auto Start Stop Engine Control Module Diesel Genset Controller Generator Accessories
Product Description
The HGM180HC generator set controller is a self-starting module. Three working states can be selected by the electric lock. The generator set can be started manually by touching the button on the panel, or the generator set can be automatically started by remote signal input, and the fault can be detected (Low oil pressure, high water temperature/cylinder temperature, external alarm, overspeed) automatically cut off the fuel relay and shut down the electromagnet to be electrified. The panel LED indicates the fault status and provides a true and effective fault alarm signal.
Performance and characteristics:
Wide DC power input range
With low oil pressure, high water temperature/cylinder temperature, overspeed protection and indication
With charging failure warning indication, no shutdown
An additional external input alarm shutdown signal
The speed signal is taken from the generating frequency
LED display various alarm status
display with operating hours meter
With fuel output, start output, preheat output, shutdown output, public alarm/idling output functions, all of which are relay output
With idle speed control function, idle delay time is programmable
Preheating delay time is programmable
The conditions for successful start can be oil pressure + power generation ( default), or only power generation
When the dial switch is set to idling/high-speed valid, the output port can be configured as idling/high-speed output, otherwise it is public alarm output.
Modular structure design, ABS plastic shell, embedded installation method, compact structure, small size, advanced single-chip control, stable performance and convenient operation
The main technical parameters:
DC power supply: 8-35V
Power generation input: AC15-300V(+20%) 50 or 60Hz programmable
Overspeed t