This is the first and only adjustable Front Seat Lift Kit by Ohio Diesel Parts compatible with Jeep Wrangler JK/JKU's that provides everything you need to modify the front seat into a higher more comfortable position. With the stock seat there is not much support under your knees and it can feel like you are sliding forward out of your seat. Our kit will allow you to gain approximately 1 Inch of average height overall and a slight recline back to give you a better vantage point and more support under your knees. Included are 4 rear discs, if you want 5/8 Inch of rise in the butt of the seat and more of a recline effect use only one disc under each rear bracket. If you want less recline and more height install two discs under each rear bracket. The front of the seat will lift 1.5 Inches and the back of the seat either 5/8 Inch or 1-1/4 Inch depending on how many of the rear spacers discs you use. Slight recline and added height makes a huge difference in comfort. Tested and verified this makes a much more comfortable riding experience for driver or passenger. This kit will lift either the driver or the passenger side. If you want to lift both seats, two kits are required. Upgraded longer bolts are included which a

INSTALLATION:

Compatible with all Jeep Wrangler JK & JKU model years 2007-2017.
Easy installation requires no special tools just a 19mm Socket, 18mm Socket, and Socket Ratchet. However a breaker bar or impact gun will make installation easier and is recommended to remove factory bolts but not necessary. Spacers install under front seat brackets; the taller 1.5” Tall round spacer installs under the front left bracket using the longer bolt and washer. The 1.5” Tall rectangular spacer installs under the front right bracket using the longer bolt and washer. The short 5/8” tall round spacers install under the rear brackets using the shorter bolts and washers. Bolts pass all the way through spacers and thread into place.