If you have to do a common rail CR injector swap this tool will make your life SO MUCH EASIER! Hassle-free design will save your injector body from being ruined from clamping straight onto it. This tool is designed to hold injectors for both 6.7L and 5.9L Cummins.
Simply clamp this tool in a vice. DO NOT OVERTIGHEN. Applying too much force could cause the tool to bend. Place tool so clamping force is distributed at the side of the tool where there is cross-support. Slide the injector through the appropriate side for your needs. Then remove or add the nozzle.
We recommend not over tightening the vice, especially if using a small vice that is not as wide as the tool. As the tool could bend if the vice is not long enough to distribute the clamping force across the whole length of the tool. Contents include: One (1) Steel Injector Nozzle Tool.