FindTape MGRS Receptive Steel Tape is a non-magnetized steel tape, designed to attract magnets. The tape consists of non-magnetized steel on one side and adhesive on the other side. This tape is a wonderful addition to any industrial shop, warehouse, or home project and instantly creates a receptive surface for magnets anywhere you can place tape.
FindTape MGRS Receptive Steel Tape is offered in an indoor-grade or outdoor-grade adhesive material. Both grades are made with a strong, flexible non-magnetic material and coated with either a high-tack rubber based adhesive (indoor-grade) or an acrylic adhesive (outdoor-grade) on one side. Designed for lightweight applications like when have a stainless steel refrigerator and need something to attract a photo with a magnet-backing to (this product will not offer enough attraction for heavier-weight objects). FindTape MGRS Receptive Steel Tape will conform to surfaces and is offered in .025 (1/40) inch thick x 1-inch x 10 or 100 feet and .025 (1/40) inch thick x 1/2-inch x 10 or 100 feet rolls wound on a 3-inch diameter core. MGRS Receptive Steel Tape indoor-grade features a service/operating temperature of 0F to 150F, while the outdoor-grade material has a 0 to 200F service/operating temperature.
NOTE: If your tape curls when you try to apply it to your surface or doesn't seem to attract well when trying a magnet against it, this is due to being wound in a roll and has no effect on the properties or quality of the tape. Simply unwind and cut a piece from the roll, place under a weight (e.g. a book or stack of papers) for a short period of time to help flatten out the strip/piece of tape, then apply to your surface or test as normal.
CAUTION: Always test the tape on a small, inconspicuous area before using to ensure the tape does not damage the surface. The adhesive may not be easily removed and could leave a mark on some surfaces. Country of Origin: United States.