Note:If you have any questions please feel free to contact us and we will solve your problem.
Description:
- 5V-10V voltage receiver is supported, otherwise the module may be damaged. - If the receiver and steering gear use the high-voltage system, the signal conversion module should be added to the module.
- 1 way steering gear signal input, control 2 way electronic switch
- 220V maximum controlled voltage.
- The controlled end supports 30A 250VAC/30VDC
- 2-way output (only one relay at a time)
- Compatible with all brands of remote control equipment without calibration.

Application Range:
Remote control model rocket launch
Remote control model smoke control
The weapon system control of the real machine
model aircraft navigation light control
Control of various remote switching systems

Functional Description:
- The remote switch remotely controls up to 2 channels of electrical equipment on the aircraft model through a switch channel on the remote control
- This equipment does not need to be calibrated, can accurately compatible with various brands of remote control equipment.
- The equipment is powered by a receiver, completely isolated from the external power supply. The external power supply is only supplied to the controlled equipment.
Typical Applications
1. Connection
Insert the signal input cable into the three-segment switch channel or rocker channel of the receiver, which corresponds to the remote control.
Connect the control switch to the device
2. Trigger
(take the throttle channel as an example) the throttle remote lever on the remote control is moved to full throttle, and a relay is closed (that is, the common end and the normal start wiring are connected, and the common end and the normally closed end are disconnected). When the throttle lever on the remote control is moved to the half throttle, both relays are not closed (that is, the common end and t