PH62 Desktop PCIE X1 to USB3.0 Expansion Card Support for PCI-E Chassis Front Panel Dual 19/20PIN Interface Expansion Support X4 X8 X16

Product parameters
Name: PCI to USB3.0 dual 19/20P expansion card
Model: PH62
Input Interface: PCI-E X1 compatible X4/X8/X16, compatible with USB2.0, USB1.1.
Support firmware upgrade.
Product Size:12*6.5*6.5cm.
Product Weight:Product+Baffle 30.6G

PCI-E to USB3.0 Dual 19/20PIN Expansion Card
USB3.0 Features.
Fast transmission speed, the theoretical transmission rate of 5Gbps/S, compared with USB2.0 480Mbps/S nearly 10 times faster.
Higher output power, each port 5V/1A output power, compared to USB2.0 5V/0.5A 1 times higher.

Resettable Fuses
Each 19P/20P output port is equipped with a 6V3A resettable fuse. When the external access to the USB device short-circuit fault, short-circuit current generated by the high temperature will cause the fuse internal melt instantly high resistance to open state to limit the short-circuit current, when the fault disappears, the temperature drops, the melt will automatically return to the original low-resistance conduction state.

Multi-layer circuit board for lossless transmission
Adopting 4-layer circuit board: very strong anti-interference ability.
Effectively ensure the stability of PCI-E high-speed signal transmission, data integrity, impedance matching.

PCI-E X1 Gold Finger
Comply with the standard PCI-E2.0 X1 contact gold finger.
Highly gold-plated: strong oxidation resistance, good conductivity, wear-resistant.

Multi-system compatibility
Compatible with Wins XP, Vista, Wins7 (need to install driver), Wins8 and Wins10 system comes with driver.