ESP32 Kit Compatible with Arduino Projects
ESP-WROOM-32 Development Board USB-C：
ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
Support many kinds of interfaces such as UART/SPI/I2C/PWM/DAC/ADC.
Built-in Wi-Fi and bluetooth
Dual core, this means it has 2 processors.
The clock frequency can go up to 240MHz and it has a 512 kB RAM.
The board offers a rich set of peripheral interfaces, including GPIO, UART, SPI, I2C.
With 2.4GHz WiFi+Bluetooth Dual-mode, support STA/AP/STA+AP mode, universal AT command, easy to use.
0.96 Inch OLED Display Screen Module：
Specifications:
Display Type: OLED (Organic Light Emitting Diode)
Resolution: 128x64 pixels
Interface: I2C Operating Voltage: 3.3V - 5V
Minimum Visible Angle: 160 Degree
Energy Consumption (Normally): 0.06w
View Angle：>160°
Diyplay Dimensions: 0.91 inches (diagonal)
Working Temperature: -20°C to 60°C
Driver IC: SSD1306 Displya
Color: Blue and Yellow
Package：
2X 30Pin CP2012 USB C ESP32 ESP-32S ESP-WROOM-32
2X 0.96 Inch OLED Display Screen Module
1X 20-pin male to female jumper wires,
1X 20-pin male to male jumper wires,
1x20-pin female to female jumper wires
1X Type-C USB cabel