Specification:
Brand: JMT
RTL9210 master chip
For NVMe PCIe SSD
Supports 2230/2242/2260/2280 size PCIe NVMe M-Key SSDs
Product weight: about 75 grams
Item Size: 120*25*8mm

Feature:All-aluminum housing, magnetic protective cover
External interface: USB3.0 Type-A direct plug-in interface is backward compatible with USB3.0 USB2.0 interface ,supports USB2.0 and 3.0 interfaces, of course, if you connect 2.0, you run 2.0 and then 3.0 run 3.0(The actual reading speed is mainly related to the SSD and the device. Different SSDs have the same device test. The test results are different,this data is for reference only)
The main control is low power consumption, the temperature is lower than the old JMS583 main control, and the current consumption is much smaller, which means that the high temperature in the use of NVME SSD is relatively reduced.
Compatible with All WINDOWS/ Linux / Mac.
Plug and play, no drivers required. (Since it is conducting heat from the NVME SSD, the enclosure may be a bit hot during operation).

Package list:1x M.2 NVME to USB3.0 SSD enclosure

Note:Just an Enclosure case, not including the hard drive.
The SATA MSATA protocol is not supported.
Samsung disk cloning software is not available.
Only supports PCIe x2 and PCIe x4 NVME protocol M.2 NGFF SSD, does not support PCIe x2 and PCIe x4 AHCI protocol M.2 NGFF SSD, does not support B + M key SATA protocol M.2 NGFF SSD